Active
Disk Image

User's Guide

How to erase hard drive? Windows7 logo   How to erase hard drive? Intel logo

About Disk Image Types

Disk image software Active@ Disk Image supports backup type and raw type disk images.

Backup Disk Image is the default type and should be used in most cases. When Raw Disk Image type is not mentioned explicitly in this guide, we are referring to the Backup Disk Image. Another file format supported is ISO image. ISO images are used to store a copy of CD/DVD/Blue-ray disc in a file and stand apart from actual disk images.

Backup Disk Images

A Backup Disk Image contains only data found in used sectors of a hard drive. This is done in order to reduce the size of the disk image file and to reduce the time it takes to create the disk image.

One Backup Disk Image archive can hold data from several partitions from one or more disks. When you select a partition to be backed up, all current data will be saved into the disk image archive.

Data that is recognized as deleted files and unused partition areas are not recorded into the image. Windows pagefiles and hibernation file data are also excluded from a Backup Disk Image because they contain temporary information which is useless to keep and restore.

Active@ Disk Image can make a backup of any file system. If a partition selected for backup is formatted with a file system that is not supported by Disk Image natively (i.e. FAT or NTFS are supported), a sector-by-sector (raw) backup will be performed.

Keep in mind that this mode is different from raw disk images described below. The image of partition of unknown file system will be placed into .ADI file; the major difference from NTFS and FAT partitions is that it will contain all sectors of the partition - used and free.

Raw Disk Images

A Raw Disk Image contains an exact, sector-by-sector copy of a single partition or disk. A Raw Disk Image of a disk or a partition is a larger file than a Backup Disk Image of the same disk or partition and it takes a longer time to create.

A Raw Disk Image archive can hold data from only one disk; either a whole disk or one partition from a single disk. It cannot contain more than one selected partition. To make a Raw Disk Image of several partitions on various disks, you may create a separate Raw Disk Image for each partition.

ISO images

ISO image is a standard format which contains an exact, sector-by-sector copy of an optical media as CD/DVD/Blue-ray disc. It is used automatically when a CD/DVD/Blue-ray disc is selected for backup. ISO image can be burned back to the optical media.

When to use Raw Disk Images

In normal conditions, you will likely use Backup Disk Images. A Backup Disk Image has the following advantages over a Raw Disk Image:

Raw Disk Images are more helpful in a data recovery scenario. Here are some reasons why a Raw Disk Image is superior for data recovery:

About disk image file names

Backup Disk Images have the file extension .ADI.

All data is stored in one file or in a sequential series of numbered files. When the disk image is split into several files, additional file names are created by adding sequential numbers to the original name.

Here is an example: If you save a Backup Disk Image with the name MyImage, the application creates a file named MyImage.adi at the specified location for the first image file. If you have configured the operation to split the image after a fixed file size, or if the image is split automatically, the next file name is MyImage1.adi. The next file name after that is MyImage2.adi, and so on.

Raw Disk Images have the file extension .DIM.

A Raw Disk Image consists of two files: a configuration file and data file. The configuration file describes the disk or partition geometry and keeps the image description. This file has the .DIM extension. When verifying or exploring a Raw Disk Image, select this file.

The raw image data files have numerical extensions starting from .001 added to the whole image name.

Here is an example: If you save a Raw Disk Image with the name MyImage, the application creates a file named MyImage.dim. This is the configuration file. Data is stored in a file named MyImage.dim.001. If more than one file is created, the next file is named MyImage.dim.002, and so on.

ISO images have the file extension .ISO. One .ISO file contains image of one optical disc, thus for every optical drive selected there will be a separate .ISO file created. Backup folder

More Info

Creating a Disk or Partition Image

Creating a Raw Disk Image

Restoring a Disk Image

Restoring a Raw Disk Image


Data Recovery

Data Utility

Data Security

Data Backup

CD/DVD Tools

欧美色视频日本片免费,欧美色色,成 人 色综合